A short sentence describing what someone will receive by subscribing
Use this bar to show information about your cookie policy.
The DSI Conical Drills Surgical Kit is an ideal choice for those needing a superior-quality surgical kit. Offering excellent performance and value for money this kit contains all the necessary instruments to perform precise implant placement operations with tremendous accuracy and simplicity. The main advantage of this kit is DSI Conical Stopper Drills that have been designed and crafted for implantation and surgical procedures. DSI Conical Stopper Drills are an ideal choice for sinus lifting surgeries due to their remarkable precision, dependability, and performance.
Features
• Outstanding performance and exceptional accuracy.
• Minimal heat generation as well as little vibration during the drilling sequence.
• Designed for optimal implantation, ensuring exceptional results each time.
• Reliable and safe solution for any drilling requirement.
• Reduce the time of healing for patients.
• Built with quality and consistency in mind.
• Diamond-like Carbon DLC coating for a superior finish, and unbeatable performance.
• Can be sterilized in an autoclave, including the plastic polymer box itself.
• 100% compatible with any DSI spiral implant and most of the platforms available on the market such compatible with: MIS®, Alpha Bio®, AB Dental®, BioHorizons®, Zimmer®, Implant Direct®, Cortex®, Alpha Gate®, Adin®, Paltop®,Ditron Dental®, Surgikor®, JdentalCare® - Internal Hex RP
Indications
This surgical kit is built to perform precision implant placement procedures with tremendous accuracy and simplicity.
Benefits
What's inside?
LD150: Lance drill Ø1.5mm
PD190: Marking drill Ø1.9mm
PD200: Pilot drill Ø2.0mm
TDE: Drill extender
CD375, CD500: Countersink drills Ø3.75-4.2 and 5.0-6.0mm
LD1520: Lindemann drill Ø1.5-2.0mm
RB38: Round bur Ø3.5mm
MMRA: Motor mount to ratchet adapter
SPP100, SPP160: Jag parallel guide pins L 10 and 16mm
SD2028L16C, SD2832L16C, SD32365L16C, SD3640L16C, SD4045L16C, SD4652L16C: Step drill with DLC coating Ø2.0x2.8, 2.8x3.2, 3.2x3.65, 3.6x4.0, 4.0x4.5, 4.6x5.2mm L 16mm
RDS2015: Ratchet driver for narrow implant Ø2.0mm
MM2028: Motor mount driver for narrow implant Ø2.0mm
RDK24100, RDK24150: Ratchet driver for implant Ø2.42mm L 10 and 15mm
MM24220, MM24028: Motor mount driver for implant Ø2.42mm L 20 and 28mm
RDK125070, RDK125150: Ratchet driver for prosthetics Ø1.25mm L 7.0 and 15.0mm
MM12520, MM12528: Motor mount driver for prosthetics Ø1.25mm L 20.0 and 28.0mm
HDK125070, HDK125150: Manual driver for prosthetics Ø1.25mm L 7.0 and 15.0mm
1000201: Torque ratchet with hexagonal head Ø6.35mm 10-35Ncm
RS6111: Surgical torque ratchet with hexagonal head Ø6.35mm 25-100Ncm
DPKOP: Depth gauge probe measuring tool
PAL94150: Removable stainless steel surgical tray
TD280L6SC, TD320L6SC, TD365L6SC, TD400L6SC, TD450L6SC: DLC coated stopper drills Ø2.8, 3.2, 3.65, 4.0, 4.5mm
TDC19X27L8CH, TDC19X27L10CH, TDC19X27L115CH, TDC19X27L13CH: Ø1.9-2.7mm L 8, 10, 11.5, 13mm
TDC21X33L8CH, TDC21X33L10CH, TDC21X33L115CH, TDC21X33L13CH: Ø2.1-3.3mm L 8, 10, 11.5, 13mm
TDC28X37L8CH, TDC28X37L10CH, TDC28X37L115CH, TDC28X37L13CH: Ø2.8-3.7mm L 8, 10, 11.5, 13mm
TDC28X40L8CH, TDC28X40L10CH, TDC28X40L115CH, TDC28X40L13CH: Ø2.8-4.0mm L 8, 10, 11.5, 13mm
TDC28X45L8CH, TDC28X45L10CH, TDC28X45L115CH, TDC28X45L13CH: Ø2.8-4.5mm L 8, 10, 11.5, 13mm
The DSI Conical Drills Surgical Kit is an ideal choice for those needing a superior-quality surgical kit. Offering excellent performance and value for money this kit contains all the necessary instruments to perform precise implant placement operations with tremendous accuracy and simplicity. The main advantage of this kit is DSI Conical Stopper Drills that have been designed and crafted for implantation and surgical procedures. DSI Conical Stopper Drills are an ideal choice for sinus lifting surgeries due to their remarkable precision, dependability, and performance.
Features
• Outstanding performance and exceptional accuracy.
• Minimal heat generation as well as little vibration during the drilling sequence.
• Designed for optimal implantation, ensuring exceptional results each time.
• Reliable and safe solution for any drilling requirement.
• Reduce the time of healing for patients.
• Built with quality and consistency in mind.
• Diamond-like Carbon DLC coating for a superior finish, and unbeatable performance.
• Can be sterilized in an autoclave, including the plastic polymer box itself.
• 100% compatible with any DSI spiral implant and most of the platforms available on the market such compatible with: MIS®, Alpha Bio®, AB Dental®, BioHorizons®, Zimmer®, Implant Direct®, Cortex®, Alpha Gate®, Adin®, Paltop®,Ditron Dental®, Surgikor®, JdentalCare® - Internal Hex RP
Indications
This surgical kit is built to perform precision implant placement procedures with tremendous accuracy and simplicity.
Benefits
What's inside?
LD150: Lance drill Ø1.5mm
PD190: Marking drill Ø1.9mm
PD200: Pilot drill Ø2.0mm
TDE: Drill extender
CD375, CD500: Countersink drills Ø3.75-4.2 and 5.0-6.0mm
LD1520: Lindemann drill Ø1.5-2.0mm
RB38: Round bur Ø3.5mm
MMRA: Motor mount to ratchet adapter
SPP100, SPP160: Jag parallel guide pins L 10 and 16mm
SD2028L16C, SD2832L16C, SD32365L16C, SD3640L16C, SD4045L16C, SD4652L16C: Step drill with DLC coating Ø2.0x2.8, 2.8x3.2, 3.2x3.65, 3.6x4.0, 4.0x4.5, 4.6x5.2mm L 16mm
RDS2015: Ratchet driver for narrow implant Ø2.0mm
MM2028: Motor mount driver for narrow implant Ø2.0mm
RDK24100, RDK24150: Ratchet driver for implant Ø2.42mm L 10 and 15mm
MM24220, MM24028: Motor mount driver for implant Ø2.42mm L 20 and 28mm
RDK125070, RDK125150: Ratchet driver for prosthetics Ø1.25mm L 7.0 and 15.0mm
MM12520, MM12528: Motor mount driver for prosthetics Ø1.25mm L 20.0 and 28.0mm
HDK125070, HDK125150: Manual driver for prosthetics Ø1.25mm L 7.0 and 15.0mm
1000201: Torque ratchet with hexagonal head Ø6.35mm 10-35Ncm
RS6111: Surgical torque ratchet with hexagonal head Ø6.35mm 25-100Ncm
DPKOP: Depth gauge probe measuring tool
PAL94150: Removable stainless steel surgical tray
TD280L6SC, TD320L6SC, TD365L6SC, TD400L6SC, TD450L6SC: DLC coated stopper drills Ø2.8, 3.2, 3.65, 4.0, 4.5mm
TDC19X27L8CH, TDC19X27L10CH, TDC19X27L115CH, TDC19X27L13CH: Ø1.9-2.7mm L 8, 10, 11.5, 13mm
TDC21X33L8CH, TDC21X33L10CH, TDC21X33L115CH, TDC21X33L13CH: Ø2.1-3.3mm L 8, 10, 11.5, 13mm
TDC28X37L8CH, TDC28X37L10CH, TDC28X37L115CH, TDC28X37L13CH: Ø2.8-3.7mm L 8, 10, 11.5, 13mm
TDC28X40L8CH, TDC28X40L10CH, TDC28X40L115CH, TDC28X40L13CH: Ø2.8-4.0mm L 8, 10, 11.5, 13mm
TDC28X45L8CH, TDC28X45L10CH, TDC28X45L115CH, TDC28X45L13CH: Ø2.8-4.5mm L 8, 10, 11.5, 13mm
We deliver worldwide.
In most cases it's a next-day dispatch - your order will be processed and prepared for delivery within 24 hours, one business day after receiving payment.
Please note: It is very important to write the address accurately, the package will deliver to the address you provided during the order process. Packages must be signed for by an adult aged 18+ years on delivery.
In addition to the price displayed, imported goods might be a subject of additional fees & taxes, collected by your country's customs authorities.
We accept payments via major credit cards (Visa, MasterCard, American Express...) We charge 3% Credit Cards fee.
Our website is certified by international data protection systems, and all payment pages are secured by an SSL certificate.
We accept Bank Transfers as well, please contact us for further details .
you can use the chat or whatsapp below, email or just call us.
We'll provide exact instructions on where to return/exchange your item(s).
Items must be returned in original packaging within 30 days of receipt. Exchanges may take up to 10 business days to process after we receive the tracking number.
If you don't receive your order within 30 days, you can request a full refund before the order is completed.